Hasulith dispersion adhesive P, bottle 10 gr

Hasulith dispersion adhesive P, bottle 10 gr

HASULITH® Dispersion Adhesive P is a highly elastic and extremely strong dispersion adhesive, free of solvents and plasticizers.
In liquid form HASULITH® Dispersion Adhesive P is milky white, but after drying almost crystal clear.

Suitable for bonding paper, cardboard, textiles, felt, cork, leather, wood to itself as well as to stone, glass, ceramics, metal, Styrofoam® and many plastics.
Not suitable for PE, PP, rubber and nylon.

- solvent-free-
dries transparent-
strong adhesive power-
highly elasticHASULITH®

Dispersions-P is non-toxic and its composition complies with Recommendation XIV, Plastic Dispersions of the German Federal Ministry of Health of 01.05.1985. The toy standard DIN EN 71- 3 (heavy metals) is also met.

Application:
The bonding surfaces must be clean and free of dust, grease, oil or release agents




























. Apply HASULITH® Dispersion Adhesive P thinly on one side and
immediately press the parts
to be bonded
together
.

When applying the adhesive with a brush, HASULITH® Dispersion Adhesive
P
can be
diluted with approx. 10% water
.

In the case of large-surface bonding, one side should be made of an absorbent material
(e.g. cardboard, wood, etc.), otherwise very long drying times
must be

expected

.

In the case of very absorbent material, the adhesive should be
applied
somewhat thicker or
on both sides
.


Curing:
Depending on the material, good initial strength is achieved after only a few minutes
, so

that work can be continued quickly

.

The drying speed
depends very much on the size of the bonding area and the
materials used

.

When bonding absorbent materials,
curing is faster than when bonding impermeable
materials (such as glass, metal, plastic,

etc

.
)


.


Bonds should be allowed to cure overnight before
being subjected to mechanical stress
.
Bonds that are stressed too early will
not achieve optimum strength
.


Separation of bonding/cleaning:
Bonding with dispersion adhesives can
usually
be
separated
with warm water
after a longer exposure time

.


Since the adhesive is difficult to remove after drying,
adhesive residues - especially on clothing - must be removed immediately
(warm water or soapy water)

.

Dispersion Adhesive P cannot
be washed out
after drying
, but the adhesives are



not












































resistant to washing











































.

After skin contact, wash off affected areas thoroughly. After eye contact,
rinse out
.
If swallowed, always consult a doctor. No irritant or allergic
reactions to skin known
.

HASULITH® Dispersion Adhesive P is non-toxic and its composition complies with
Recommendation XIV, Plastic Dispersions of the Federal Ministry of Health of
01.05.1985. The toy standard DIN EN71-
3 (heavy metals) is also met


.




Storage:
Storage temperature: +5°C to +25°C
.
The adhesive becomes unusable due to frost
. HASULITH® Dispersion Adhesive P has a
shelf life of
at least
12 months
when tightly closed.
Clean bottle tip after each use and
close container immediately
.

Fully cured adhesive residues and empty or dried adhesive bottles
can be disposed of in small quantities with household
waste.

Larger quantities or uncured adhesive residues must be disposed of at
hazardous waste
collection points.


Our adhesives are VEGAN!